Series 120/121M 5mm/5.08 raised and Double Stacked Vertical Entry Header
Series 120/121M 5mm/5.08 vertical pin headers are available in either a double stacked version (type161) which enables high density installations to be achieved or a raised version (type 191) suitable for applications where adjacent components require raised entry.
They are compatible for use with series 120/121 sockets.
They can be supplied with or without sidewalls in 5mm pitch (series 120) or 5.08mm pitch (series 121).
The raised version is available in 2 to 24 pole lengths and the double stacked version is available in 4 to 48 pole lengths.
Refer to datasheet for part numbrs.
|Mouldings:||nylon 6.6, grey, UL94 V0|
|Solder pins:||brass, tinned|
|Voltage rating:||600v ~ to VDE 0110, pollution degree 2.
Creepage and clearance distance > 3.2mm.
Breakdown voltage 2500v ~
|Tracking distance:||CTI > 600|
|Temp limits:||max short term: 140º C
continuous: RTI 105º C
|Pin spacing:||series120: 5mm
|Recommended hole dia.
in p.c. board:
Marking: consecutive numbering, lettering or special printing available. Please provide sketch.
Pitch: also available in 10mm pitch upon request.
Pins: can be supplied with longer pins up to 75mm in length.
Series 161: this range can also be supplied with the rear row transposed 2.5mm to the right, details upon request.