Complete wiring systems and connection solutions

sales@metway.co.uk Tel: 01273 439266

Series 950DSMD 5mm pitch printed circuit connector

Download Full Datasheet

Features

Series 950DSMD terminal is designed for use in an automated assemby line and is supplied with a removable pick disc although they can also be supplied loose packed in boxes. The terminal housing incorporates a floating terminal body to compensate for irregularities in the surface of the PC board and this same feature eliminates CTE (coefficient of thermal expansion) mismatch with the PCB and thus promotes excellent in field reliability and the successful passing of thermal cycle testing.

Technical Details

Mouldings: PA HT, black, V0
Current rating: 17.5A
Overvoltage category: III III II
Pollution level: 3 2 2
Rated voltage: 160V
Rated impulse voltage: 2.5kV 2.5kV 2.5kV
Tracking distance: CTI ≥ 600
Temp range -40º C up to 150º C; reflow solder
temperature (peak) max. 260º C (15-30s)
Pin spacing: 5.00mm
Screw: M2.6, brass, tinned
Screw tightening torque: 0.4 Nm
Terminal body: brass, tinned
Rated cross section: 1.5mm2
Conductor size: without wire protectors: 0.75mm2 – 4.00mm2
with wire protectors: 0.34mm2 – 2.50mm2
Wire stripping length: 6mm
Solder paste thickness: 0.15mm – 0.2mm
Number of poles: 2 – 12

Options

Also available in white
Consecutive numbering.
Special marking to drawing.
Self adhesive marking strip.
Longer pole lengths on request.
Also available for through hole processes. Contact the Metway sales
office for further details.

950DSMD

Other 5mm Pitch SMD and THR Printed Circuit Connectors Products

140ATHR

Series 140ATHR 5mm Pitch Side Entry PCB Connector

View product »

974SMD

Series 974SMD 5mm Pitch 45º Entry Connector

View product »