Complete wiring systems and connection solutions

sales@metway.co.uk Tel: 01273 439266

Series 974SMD 5mm Pitch 45º Entry Connector

Download Full Datasheet

Features

Series 974SMD has a 5mm pitch with a wire entry at 45º to the PCB, allowing potential locations of terminals one behind the other for space saving.

The 974 series has been designed for use in automatic reflow solder processes with availability of lengths from 2-12 poles.

The floating terminal bodies are designed to compensate for irregularities on the PC board, ensuring full coplanarity following assembly.

As with all SMD products, the 974 series is made from a heat resistant thermoplastic material and comes packed in either magazines or equipped with pick discs in tape on reel, making this genuine SMD terminal suitable for automatic assembly lines.

The design of the terminal body negates the need for a pick cap, therefore speeding up production.

Technical Details

Mouldings: PA HT, black, V0
Current rating: 24A
Overvoltage category: III III II
Pollution level: 3 2 2
Rated voltage: 250v 320v 630v
Rated impulse voltage: 4kV 4kV 4kV
Tracking distance: CTI ≥ 600
Temp limits: -40º C up to 150º C; reflow solder
temperature (peak) max. 260º C (15-30s)
Pin spacing: 5mm
Screw: M3, brass, tinned
Screw tightening torque: 0.5 Nm
Terminal body: brass, tinned
Rated cross section: 2.5mm2
Wire stripping length: 6mm
Solder paste thickness: 0.15mm – 0.2mm
Clamping range: solid: 0.75mm2 – 4mm2 /
stranded: 0.75mm2 – 2.5mm2 / AWG: 18 – 12
Number of poles: 2 – 12
Usable with: 120 series plugs. For further details
please contact the sales office.

Options

Consecutive numbering.
Special marking to drawing.
Marking strip BST-5.0.

974SMD

Other 5mm Pitch SMD and THR Printed Circuit Connectors Products

140ATHR

Series 140ATHR 5mm Pitch Side Entry PCB Connector

View product »

950DSMD

Series 950DSMD 5mm pitch printed circuit connector

View product »