Metway DALI Broadcast Lighting Control Module MA-DD1LCM10/M
The Metway DALI Broadcast LCM MA-DD1LCM10/M is used to control up to 10 channels.
Each channel can be programmed for:
- Relay only
- DALI only
- DALI + relay
- Relay or DSI
- Relay 0-10
- Relay 1-10
The Metway DALI Broadcast LCM has:
- 10 x 6 pole sockets to connect fittings
- 2 x RJ11 connectorsfor the CAN network
- Internal hardwired CAN connections
- 2 x RJ12 for PIRs and Scene plates
- 10-pin hardwired connector for 8 volt-free inputs
There is also an integral emergency relay.
The Dali Broadcast enclosure has been designed for ease of installation and set up with ‘Z’ bolt fixing rails provided on the rear and all connections to the unit can be pre-wired.
A removable memory module facilitates fast configuration of a replacement LCM should that be needed. In other words, should an LCM need to be replaced for any reason, no reprogramming is necessary, simply remove the memory module and reinsert it into the new Controller.
Please download full datasheet for all technical information.