Metway MA-DS10LCM10 Lighting Control Module
The Metway MA-DS10LCM10 uses DALI protocol to control up to 10 channels from one controller and incorporates one relay per channel to switch non-DALI fittings.
- 10 x 6 pole sockets to connect fittings
- 2 x RJ11 connectors for the CAN network
- Internal hardwired CAN connections
- 2 x RJ12 for PIRs and Scene Plates
- 10-pin hardwired connector for 8 volt-free inputs
- 1 switching relay per channel
There is also an integral emergency relay.
The MA-DALILCM10/M enclosure has been designed for ease of installation and set up with ‘Z’ bolt fixing rails provided on the rear and all connections to the unit can be pre-wired.
Lighting can be programmed into groups, with multiple group capability.
A removable memory module facilitates fast configuration of a replacement LCM should that be needed. In other words, should an LCM need to be replaced for any reason, no reprogramming is necessary, simply remove the memory module and reinsert it into the new Controller.
Please download full datasheet for all technical information.