CRBPIR2CH - Ceiling PIR presence/absence detector 2 channel
The CRBPIR2CH PIR (passive infrared) presence detector provides automatic control of lighting loads with optional manual control. The detector provides two independently controlled output channels that can be used for a variety of applications.
Occupancy of two independent lighting circuits using a single detector, e.g. for essential and non-essential supplies.
Occupancy and lux control of one lighting circuit and just occupancy control of a second circuit, e.g. where a row of luminaries by a window is lux controlled whilst inner rows are switched on occupancy only .
Occupancy and lux control of a lighting circuit and just occupancy control of a ventilation circuit .
Occupancy on both lighting circuits, with separate lux control on each circuit.
All functionality is fully programmable using an IR handset.
|Operating voltage||220-240v AC|
|Time out period||10 seconds to 99 minutes|
|Light level||light to dark|
|Cut out||64mm diameter|
|Material||flame retardent ABS|
Part numbers and applications
|MBPIR03P2CH||c/w 3m lead hardwired for use with Metway MMB6-8/12|
|MBPIR05P2CH||c/w 5m lead hardwired for use with Metway MMB6-8/12|
|MBPIR03P2CHAB||c/w 3m lead absence switch input hardwired for use with MMB6-8/12|
|MBPIR05P2CHAB||c/w 5m lead absence switch input hardwired for use with MMB6-8/12|
|MCCPIR03P2CH||c/w 3m lead hardwired for use with MCC8/10|
|MCCPIR05P2CH||c/w 5m lead hardwired for use with MCC8/10|
|MCCPIR03P2CHAB||c/w 3m lead and absence switch hardwired for use with MCC8/10|
|MCCPIR05P2CHAB||c/w 5m lead and absence switch hardwired for use with MCC8/10|
UHS7 – User handset override on/off, lux up and down
CRPHS5 – basic programming handset
CRPHS – full function programming handset