Complete wiring systems and connection solutions

sales@metway.co.uk Tel: 01273 439266

Passive Infra Red Presence Detectors MW1200PF

Download Full Datasheet

Features

Metway’s Passive Infra Red MW1200PF range of presence detectors are slimline in design and feature an in-built photocell and infra red override. This allows the user to override the lighting or to remotely adjust the time delay or lux levels to provide both convenience and safety. Designed to control small groups of luminaires it is ideally suited for the office environment. (Standard on/off version.)

* Photocell:  Passive to hold off lights in bright ambient conditions
Active to turn lights on/off when natural light fluctuates
Disabled – the photocell has no effect

* 5-35min off delay following last observed movement

* 6m detection pattern at floor level based upon 2.4m mounting height

* Operation: Auto to switch lights on /off automatically
Semi-auto to turn lights on by wall switch and switch off automatically  (absence detection)

* Remote override via HC5

* Programming via HP2000

 

Technical Details

Max. recommended mounting height 3m
Photocell 50-5000 lux
Operating voltage 230v
Product rating & recommended circuit protection 10A
Max. recommended load 6A
Material flame retardant ABS
Cut out 50mm dia. 64mm if using the optional flange ring (supplied as standard)

Options

Part numbers (standard on/off)

MW1200PF (c/w 3m lead to free end)
MW1200PF-4P (c/w 3m lead to 4-pole green male connector) for use with Metway PIR switching module
MW1200PF-MB (c/w 3m lead to 6-pole GST male connector) for use with Metway marshalling box
presence detectors

Other Passive Infra Red Products

Passive Infra Red CRBPIRDD - Ceiling PIR presence detector – DALI / DSI dimming

CRBPIR2CH – Ceiling PIR presence/absence detector 2 channel

View product »

Passive Infra Red CRBPIRDD - Ceiling PIR presence detector – DALI / DSI dimming

CRBPIRDD – Ceiling PIR presence detector – DALI / DSI dimming

View product »