Series 982 3/8" Pitch Side and Top Entry Barrier Connector
Features
Series 982 barrier connectors are 3/8″ pitch and have combined screw and washer assemblies to provide a very secure clamping of conductors.
They are available in single pin side entry (type S), double pin side entry (type D) and single pin top entry (type W) in lengths from 2 to 26 poles.
This range is suitable for end stacking.
Technical Details
| Mouldings: | nylon 6.6, grey, UL94 V2 |
| Inserts: | brass, tinned |
| Screws: | M4, steel, zinc plated, blue passivated |
| Wire protectors: | n/a |
| Pressure plates: | steel, zinc plated, blue passivated |
| Current rating: | see approvals |
| Voltage rating: | 500v ~ to VDE 0110, pollution degree 3. Creepage distance 6.3mm, clearance 5mm. Breakdown voltage 2500v ~ |
| Tracking distance: | CTI > 600 |
| Conductor size: | 2 x 2.5mm2 |
| Temp limits: | max short term: 140º C continuous: RTI 105º C |
| Pin spacing: | 3/8” (9.52mm) |
| Wire stripping length: | 6.5mm – 7mm |
| Recommended hole dia. in p.c. board: |
1.3mm |
Options
Marking: consecutive numbering, lettering or special printing available. Please provide sketch.
Insulating covers: enquire for details.
