Series 110 3.5mm Two Part PC Connectors and Header
Series 110 offers two part connectors and headers for electrical equipment where quick disconnection is required, combined with a need for a high density of connections.
The pin spacing of just 3.5mm allows this.
Type 110A111 are loose screw connectors available from 2 to 24 poles.
Type 110A115 are from 2 to 22 poles and can be secured to the headers by screw fixing flanges for additional security.
|Mouldings:||nylon 6.6, grey, UL94 V0|
|Screws:||M2, steel, zinc plated, blue passivated|
|Contact springs:||copper based alloy, tin plated|
|Solder pins:||brass, electrotinned|
|Wire protectors:||tin plated, copper alloy|
|Voltage rating:||150v to EN 60 998-1 / 300v to UL /
300v to CSA
|Conductor size:||0.5mm2 – 1.5mm2|
|Temp limits:||max short term: 140º C
continuous: RTI 105º C
|Screw tightening torque:||0.2 Nm|
|Wire stripping length:||6mm|
|Recommended hole dia.
in p.c. board:
7mm pin spacing.
Marking: consecutive numbering or special. Please provide details.