Series 645TDS 5mm Pitch Standard Profile interlocking 45º Entry Rising Clamp
Series 645TDS are 5mm pitch, 45° entry connectors and are available in 2 and 3 pole versions which have interlocking dovetails to enable longer lengths to be assembled.
Supplied as 2 and 3 pole modules, or to pre-assembled required lengths.
|Mouldings:||PBT, grey, UL94 V0|
|Inserts & solder pins:||brass, tinned to ISO 2093|
|Screws:||M2.5, steel, galvanised and chromed|
|Wire protectors:||brass, tinned|
|Temp. limits:||max short term: 200º C
continuous: RTI 120º C
|Pin spacing:||5mm / 10mm|
|Wire stripping length:||6mm – 6.5mm|
|Recommended hole dia.
in p.c. board:
|1.2mm – 1.4mm|
Marking: special printing available. Upon request
Pin spacing: available in 10mm pitch type 646T.
Colour: also available in colours Green,Black and Blue.