Series 120M SMD 5mm Pitch vertical Enclosed Header
Features
Series 120M SMD is a pin strip header with a 5mm pitch for surface mount solder processes.
It is suitable for use with all plugs of the 120 series in the range and is available in lengths from 2-22 poles.
The floating solder anchors on either side of the housing, ensuring 100% coplanarity with the board following the reflow solder process.
These anchors also act as the main means of adhesion to the board, providing an exceptionally high retention force for the terminal block on the board.
As with all SMD products, the 120 series is made from a heat resistant thermoplastic material and comes packed in either magazines or equipped with pick discs in tape on reel, making this genuine SMD terminal suitable for automatic assembly lines.
Technical Details
Mouldings: | PA HT, grey, V0 |
Current rating: | 12A |
Overvoltage category: | III III II |
Pollution level: | 3 2 2 |
Rated voltage: | 160v 160v 160v |
Rated impulse voltage: | 2.5kV 2.5kV 2.5kV |
Tracking distance: | CTI ≥ 250 |
Temp limits: | -40º C up to 150º C; reflow solder temperature (peak) max. 260º C (15-30s) |
Pin spacing: | 5mm |
Solder pin: | 1.1mm, brass, tinned |
Solder anchor: | brass, tinned |
Solder paste thickness: | 0.15mm – 0.2mm |
Number of poles: | 2 – 22 |
Usable with: | all 120 series plugs |
Options
Consecutive numbering.
Special marking to drawing.
Longer pole lengths on request.



