Series 964 / 974T 5mm/5.08mm Pitch Standard Profile Interlocking 45º Entry
Series 964 / 974T connectors are 45° entry in a standard profile housing and are suitable for high density installations.
They are available in imperial pitch (series 964) and metric pitch (series 974).
Both versions are supplied in 2 and 3 pole interlocking modules or pre-assembled to required lengths and are available with or without wire protectors.
|Mouldings:||nylon 6.6, grey, UL94 V0|
|Screws:||M3, steel, zinc plated, clear passivated|
|Wire protectors:||stainless steel|
|Voltage rating:||600v ~ to VDE 0110, pollution degree 1.
Creepage & clearance distance 3.5mm.
Breakdown voltage 2500v ~
|Tracking distance:||CTI > 600|
|Temp. limits:||max short term: 140º C
continuous: RTI 105º C
|Pin spacing:||series 964: 5.08mm
series 974: 5mm
|Screw tightening torque:||0.51 Nm|
|Wire stripping length:||6.5mm|
|Recommended hole dia. in p.c. board:||1.3mm|
Marking: consecutive numbering, lettering or special printing available.Upon request
Longer pins: available up to 75mm in length.
Single piece housings: series 974 one piece versions available 2-26 pole