Series 805GS 10mm pitch screw entry connector
Series 805GS connectors provide connection to the printed circuit board via clamping screw terminals.
They are 10mm pitch and are available in lengths from 2 to 12 poles.
|Mouldings:||nylon 6.6, grey, UL94 V2|
|Screws:||M3.5 x 6mm, steel, zinc plated, chromed|
|Screw tightening torque:||0.8 Nm|
|Current rating:||screw terminals – to EN 60 998: 24A|
|Conductor size:||up to 4mm2|
|Temp limits:||max short term: 160º C
continuous: RTI 100º C
|Wire stripping length:||12mm – 12.5mm|
|Recommended hole dia.
in p.c. board:
Marking: consecutive numbering, lettering or special printing available. Please provide sketch.