Our MCC to 4 pole flat extender leads, can be latched to our 4 pole lcm and then connected to our 4 pole tee piece and other 4 pole flat leads if you need the option to daisy-chain.

They are supplied with a 4-pole side latching plug, to a free end using 1.5mm² LS0H cable.

This can be supplied in a variety of lengths as per your requirements.

These are supplied with a black industry standard, connector coding.

Our MCC to 6 pole flat extender leads, can be latched to our 6 pole lcm and then connected to our 6 pole tee piece and other 6 pole flat leads if you need the option to daisy-chain.

They are supplied with a 6-pole side latching plug, to a female 6 pole socket using 1.5mm² LS0H cable.

This can be supplied in a variety of lengths as per your requirements.

These are supplied with a black/blue industry standard, connector coding.

Our MCC4PB plug can be connected to either our MCC5S or MCC10S Connection Centre.

These are supplied with a 4 pole black industry standard, connector coding.

There can be supplied alternatively with red covers.

Our new lighting connectors LCS 75 PRO are the ideal solution for quick connection of water-proof, industrial luminaires and housing up to IP68. Here, the entire luminaire with its tube inside may be fixed to the ceiling with no need to open it. Electrical connection is made from the outside. This way the luminaire is perfectly mounted in less than 1 minute!

Our new lighting connectors LCS 75 are the ideal solution for quick connection of water-proof, industrial luminaires and housing up to IP68. Here, the entire luminaire with its tube inside may be fixed to the ceiling with no need to open it. Electrical connection is made from the outside. This way the luminaire is perfectly mounted in less than 1 minute!

Our MCC5S and MCC10S Connection Centre LCM'S, use a 4 pole lead to connect to luminaires. They are supplied with a 4-pole side latching plug, to a free end using 1.00mm² LS0H cable.

This can be supplied in a variety of cores, and lengths as per your requirements.

These are supplied with a black industry standard, connector coding.

MDCC12B 12 x 6-pole Dali luminaire outputs. 2 x 3-pole Dali sensor connection. 125mA Dali power supply. Option for Bluetooth Dali module installation.

The MCC10B-7 features ten 6-pole outputs for luminaires and two 7-pole connections for presence and absence detection.

MCC10S has 10 x 4-pole luminaire outputs. 2 x 6-pole presence and absence connection.

MCC10B is a new version of an existing product. With 10 x 6-pole luminaire outputs. Dual channel with 2 x 6-pole presence connection 2 x 6 + 3-pole absence connection its simple to install and offers a cost effective solution for luminaire connections.

MCC8B is an 8 x 6-pole luminaire outputs. Dual channel with 2 x 6-pole presence connection 2 x 6 + 3-pole absence connection.

MCC5B-7 is a 6 pole, 5 x luminaire output single channel device with a dedicated 7 pole PIR presence or absence connection.